| |
DOI: | 10.1080/14763141.2013.769277 |
Web URL(s): | http://www.tandfonline.com/doi/full/10.1080/14763141.2013.769277 Last checked: Item not verified Access conditions: Item is within a limited-access website http://www.tandfonline.com/doi/pdf/10.1080/14763141.2013.769277 Last checked: Item not verified Requires: PDF Reader Access conditions: Item is within a limited-access website |
Publication Type:
| Report |
Author(s): | Galbusera, Fabio;
Tornese, Davide Zai;
Anasetti, Federica;
Bersini, Simone;
Volpi, Piero;
La Barbera, Luigi;
Villa, Tomaso |
Author Affiliation: | Galbusera, Tornese, Anasetti, Bersini, and Villa: IRCCS Istituto Ortopedico Galeazzi; Bersini and La Barbera: Department of Electronics, Information and Bioengineering; La Barbera and Villa: Department of Chemistry, Materials and Chemical Engineering, Politecnico di Milano, Milan; Volpi: IRCCS Istituto Clinico Humanitas, Rozzano, Italy; Galbusera: Institute of Orthopaedic Research and Biomechanics, Center of Musculoskeletal Research Ulm (ZMFU), University of Ulm, Ulm, Germany |
Title: | Does soccer cleat design influence the rotational interaction with the playing surface? |
Source: | Sports Biomechanics. Vol. 12, No. 3, March 2013, p. 293-301. |
Publishing Information: | Edinburgh, Scotland, United Kingdom: Edinburgh University Press on behalf of International Society of Biomechanics in Sports |
# of Pages: | 9 |
Related Web URL: | http://www.tandfonline.com/doi/abs/10.1080/14763141.2013.769277 Last checked: 10/29/2014 Notes: Abstract only |
Keywords: | TIC Keywords: Athletic injuries; Equipment for play; Footwear; Natural versus artificial turf; Risk assessment
|
Abstract/Contents: | "Non-contact injuries in soccer players may be related to the interplay between cleat type and playing surface, and bladed shoes were often blamed for non-contact injuries with no research support. The aim of this study was to compare the rotational resistance (stiffness and peak sustainable torque) among three types of soccer cleats (metal studs, molded rubber studs, and bladed) in a controlled laboratory environment. The shoes were tested on both natural and artificial turfs under a compressive preload of 1000 N and with internal and external rotations. The three shoe models showed comparable performances with a good repeatability for each individual test on both playing surfaces. A less stiff behavior was observed for the natural turf. A tendency toward highest peak torque was observed in the studded model on natural surface. The bladed cleats provided peak torque and rotational stiffness comparable to the other models. Studded and bladed cleats did not significantly differ in their interaction with the playing surface. Therefore, soccer shoes with bladed cleats should not be banned in the context of presumed higher risk for non-contact injuries." |
Language: | English |
References: | Unknown |
| ASA/CSSA/SSSA Citation (Crop Science-Like - may be incomplete): Galbusera, F., D. Z. Tornese, F. Anasetti, S. Bersini, P. Volpi, L. La Barbera, et al. 2013. Does soccer cleat design influence the rotational interaction with the playing surface?. Sports Biomech. 12(3):p. 293-301. |
| Fastlink to access this record outside TGIF: https://tic.msu.edu/tgif/flink?recno=249559 |
| If there are problems with this record, send us feedback about record 249559. |
| Choices for finding the above item: |
| DOI: 10.1080/14763141.2013.769277 |
| Web URL(s): http://www.tandfonline.com/doi/full/10.1080/14763141.2013.769277 Last checked: Item not verified Access conditions: Item is within a limited-access website http://www.tandfonline.com/doi/pdf/10.1080/14763141.2013.769277 Last checked: Item not verified Requires: PDF Reader Access conditions: Item is within a limited-access website |
| Find from within TIC: Digitally in TIC by record number. |
| Request through your local library's inter-library loan service (bring or send a copy of this TGIF record) |